Eaton Careers

Industrial Spray Technician (2nd Shift)

Euclid, Ohio
Manufacturing & Operations


Job Description

Eaton located in Euclid, OH has an opening for a Industrial Spray Technician.  
  • Follow print specifications and established operating procedures, perform a variety of operations to fabricate bearing assemblies and apply coatings to a variety of hardware.
  • Perform visual and dimensional inspections and maintain accurate documentation on a variety of parts in accordance with ANSI Y14-5 and the certified operator program.
  • Assistance may be given other operators on proper operational procedures.
  • Perform housekeeping and other job related duties as assigned by supervisor.
Essential Functions:
  • Perform preparatory work such as unpacking, visual inspection, degreasing, blasting, masking, plugging, and wrapping, etc., to screen surfaces for spray application according to blueprints, operational sketches, specification sheets, and tool lists.
  • Perform acid dip of aluminum bearings prior to epoxy operation per operational sketches.
  • Mix spray compounds according to specifications.  Prepare solutions, paying particular attention to volumetric, viscosity and specific gravity requirements.
  • Clean, adjust and fill spray equipment.  Check equipment for proper operation.
  • On coatings requiring a drying or curing cycle, set oven, or other drying equipment controls to specified temperature and time.
  • Apply coatings to specified thicknesses.  Use electronic gages (such as Permascope) and other measuring/testing equipment as provided to determine if thickness meets specifications.
  • Lap and/or ball burnish coated surface to bring into finished tolerances.
  • Perform all post-operative work such as removing masks, tape and plugs and use solvent to clean up parts as required.
  • Maintain component build records per government contract requirements.
  • Handle all materials carefully.  No open flame permitted.
  • Operator must wear fume mask in posted areas.
  • Perform necessary part marking.
  • Move material within the cell.
  • Chart, plot and react to data per SPC requirement.  Load and unload Datamytes.
  • Maintain accurate lot control (QCP 6.0) traceability, record keeping, log book entries, NCR’s (QCP 11.0) and associated documentation.
  • Perform minor equipment maintenance.
  • May be required to perform more than one operation at a time as directed by the supervisor.
  • May be required to burr work internal to the cycle.
  • Perform sub-assembly work.


Basic Qualifications:
  • Must have a high School diploma or GED from an accredited institution.
  • Minimum one year of machining or industrial spraying experience.
  • Must reside within a 50 mile radius of work location; no relocation benefit is provided.
  • Must be authorized to work in the United States without company sponsorship.
  • This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. ‘Green Card Holder’), Political Asylee, or Refugee
Preferred Qualifications:
  • Minimum of two years' experience with electronic and hand gages
Position Criteria:
  • Previous experience with hand tools and gages.
  • Work with tight tolerances
  • Become a certified operator within 40 days of becoming active on the code.

Eaton is a power management company with 2015 sales of $20.9 billion. Eaton provides energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton has approximately 97,000 employees and sells products to customers in more than 175 countries. For more information, visit At Eaton, we see things differently. We see opportunities to innovate, go above and beyond, and we work hard because what we do reflects who we are. If you see things differently—if you’re determined, motivated and focused on improving the world around you—then it’s time to see where a career at Eaton can take you. For more information, visit Eaton is an Equal Opportunity and Affirmative Action Employer. Eaton is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Job: Manufacturing & Operations

Region: North America – US/Puerto Rico
Organization: AER FMC Fuel Motion Control Systems

Job Level: Individual Contributor
Schedule: Full-time
Is remote work (i.e. working from home or another Eaton facility) allowed for this position?: No
Does this position offer relocation?: No
Travel: No

Requisition ID: 051087