Please enter a valid email.
Unfortunately, our network is not responding. Please try again later.
Your job alert was successfully created.
Manufacturing Technician (2nd Shift)
- Assemble, fit and mount sub-assemblies, components, and standard and near standard fixed assemblies in Motor Control Centers, Enclosed Control and related assemblies and sub-assemblies.
- Perform assembly required for test preparation and final inspection.
- Assemble and wire units, relay panels, panel boards, space heaters, and control panels.
- Bend and install power cable and leads, fabricate pre-cable unit, panel and MTB harnesses, and power leads.
- Use established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled.
- Stage parts for customer orders
Work from oral or written instructions from supervision and/or prints, inspection reports, manufacturing information sheets, and standard or near standard wiring diagrams.
Utilize manufacturing information sheets, determine necessary parts, write requisitions, and obtain materials from stock areas.
Read shop orders and drawings to determine assembly procedures such as component types and configuration, mounting locations and clearances required.
Assemble and fit parts and components to form sub-assemblies, or completed assemblies.
Assemble and wire control devices, cutting wires to length.
Make adjustments to insure correct alignment and clearances.
Install units, pan assemblies and cover up steel, meters, kirk keys, pull boxes, reactors, relays, fuses, MTB assemblies, panel boards, space heaters, transformers, etc. by mounting / bolting into place. Assemble and install bus work such as lug adapters, cross over bus, splices, etc.
Make pre-bent cable unit, MTB and control panel harnesses using pre-cable boards, control panels and hand crimp lugs if necessary. Cut, install and connect wire and/or cable in units where circuitry requires additional relays, timers, fuses, etc. Cut, form and connect control wire, power wire and cable, point to point on units, relay panels, control panels, and space heaters. Make solder connections.
High School Diploma or GED from an accredited institution
Must be legally authorized to work in the US without company sponsorship
No relocation is provided for this position, only candidates that currently reside within 50 miles of the Fayetteville, NC facility will be considered.
Previous experience in a manufacturing environment
We make what matters work. Everywhere you look—from the technology and machinery that surrounds us, to the critical services and infrastructure that we depend on every day—you’ll find one thing in common. It all relies on power. That’s why Eaton is dedicated to improving people’s lives and the environment with power management technologies that are more reliable, efficient, safe and sustainable. Because this is what matters. We are confident we can deliver on this promise because of the attributes that our employees embody. We’re ethical, passionate, accountable, efficient, transparent and we’re committed to learning. These values enable us to tackle some of the toughest challenges on the planet, never losing sight of what matters.
Job: Manufacturing & Operations
Region: North America – US/Puerto Rico
Organization: ESSG PDCAD Power Distrib Control Assy Div
Job Level: Individual Contributor
Is remote work (i.e. working from home or another Eaton facility) allowed for this position?: No
Does this position offer relocation?: No